Specifications subject to change without prior notice. Last updated 01/07/22. Smart dimmer module (phase cut trailing edge) that can be fitted behind a standard wall switch plate and connects to a momentary push button mechanism FEATURES • Phase cut trailing edge (TE) dimmer • 5-wire connection for power, load and momentary push button mechanism • Reliable Bluetooth® mesh network connectivity to all KASTA devices • 8-way multiway control • Short press for ON/OFF control • Long press for dimming control • Over-current protection • Supports core KASTA functionality - control devices, groups, scenes, timers and scheduling • Suits all Australian standard wall plates using a momentary mechanism • iOS and Android app setup and control • 3 year warranty Power Supply 220-240V a.c. 50Hz Operating Ambient Temperature -20 to 40°C IP Rating IP20 Thermal Derating 25 to 40°C (300W-165W) Physical Connection Type Terminals Wiring Connections Active, Neutral, Load & Momentary Mechanism Momentary Input (T1/T2) Local signal input only (not 240V a.c.) Max. wiring length between T1/T2 and momentary mechanism is 10m LED Load Wattage 2W to 300W Dimming Method Phase Cut Trailing Edge Dimming Range 2-100% Multi-gang Derating 2-225W, 3-165W @ 25°C Housing Material Polycarbonate (PC) Standards Complied CoS SAA 183649, AS/NZS 60669.2.1, AS/NZS 60669.1, AS/NZS CISPR 15, AS/NZS 4268 SPECIFICATIONS Dimmer Module KASTA-D300IBH DIMENSIONS 45 mm 45 mm 22 mm CONNECTION N T2 T1 ACTIVE SWITCHED ACTIVE LOAD NEUTRAL 1 C 2 BELL PRESS MOMENTARY MECHANISM DIMMER / 38 /
RkJQdWJsaXNoZXIy NDQ2MDk=