Specifications subject to change without prior notice. Last updated 01/07/22. Smart push button dimmer mechanism (phase cut trailing edge) that clips into standard wall plate FEATURES • Mains powered phase cut trailing edge (TE) dimmer • 2-wire connection for easy installation • Slim design allows installation up to 6-gang onto a standard wall plate • Reliable Bluetooth® mesh network connectivity to all your KASTA devices • 8-way multiway control • Short press for ON/OFF control • Long press for dimming control • Over-current protection • Supports core KASTA functionality - control devices, groups, scenes, timers and scheduling • Suits most Australian wall plates • Supplied with White button caps (2 x styles) • iOS and Android app setup and control • 3 year warranty Power Supply 220-240V a.c. 50Hz Operating Ambient Temperature -20 to 40°C IP Rating IP20 Thermal Derating 25 to 40°C (300W-100W) Physical Connection Type Fly leads Wiring Connections Active & Load LED Load Wattage 3W* - 300W** Dimming Method Phase Cut Trailing Edge Dimming Range 2-100% Multi-gang Derating 2-270W, 3-240W, 4-200W, 5-150W, 6-100W @ 25°C Housing Material Polycarbonate (PC) LED Indicators Blue Standards Complied AS/NZS 60669.2.1, AS/NZS 60669.1, AS/NZS CISPR 15, AS/NZS 4268 SPECIFICATIONS Dimmer Mechanism KASTA-DM300BH-W *May require load correct capacitor if less than 15W (supplied in box). **Maximum load is based on Haneco Dimmable LED drivers. Other LED loads may not be compatible. Contact the manufacturer for compatibility advice. DIMENSIONS 23 mm 23 mm 36 mm 38 mm 42 mm CONNECTION DIMMER ACTIVE NEUTRAL LOAD CORRECTION CAPACITOR SWITCHED ACTIVE / 34 /
RkJQdWJsaXNoZXIy NDQ2MDk=