Car Audio Car Audio 5-3 Truly the tower of automotive audio power!! Speakers 5 Section • Purpose-built to move air and create clean, articulate bass • Copper shorting rings and dual spiders limit distortion and increase linearity • Ultra-stiff composite cone • Dual linear stiffness spiders limit distortion and rocking modes • High output meets high fidelity Dayton Audio Ultimax™ Series DVC Subwoofers #295-508 #295-510 #295-512 #295-514 #295-518 Note: All parameters derived with voice coils wired in series. Dayton Audio UM8-22 8" Ultimax DVC Subwoofer • Thick, one-piece Nomex honeycomb covered cone with woven heavy-duty glass-fiber Specifications: • Power handling: 300 watts RMS/600 watts max • Impedance: 4 ohms (2 ohms/ coil) • Frequency response: 30-800 Hz • Fs: 31.6 Hz • Vas: 0.75 ft³ • Qts: 0.58 • Xmax: 16 mm • SPL: 84.2 dB 2.83V/1m. #295-508 Dayton Audio UM10-22 10" Ultimax DVC Subwoofer • Dual 2 ohm, 2-layer copper voice coils • Large vented pole piece and under spider venting • 500 watts RMS power handling Specifications: • Power handling: 500 watts RMS/1,000 watts max • Impedance: 4 ohms (2 ohms/ coil) • Frequency response: 25-1,500 Hz • SPL: 84.8 dB 2.83V/1m • Fs: 26.9 Hz • Vas: 0.83 ft³ • Qts: 0.49 • Xmax: 19 mm. #295-510 Dayton Audio UM12-22 12" Ultimax DVC Subwoofer • Thick, one-piece Nomex honeycomb covered cone with woven heavy-duty glass-fiber • Tall-boy rubber surround for extra-long linear excursion without reducing cone surface area • 600 watts RMS power handling Specifications: • Power handling: 600 watts RMS/1,200 watts max • Impedance: 4 ohms (2 ohms/coil) • Frequency response: 20-1,000 Hz • SPL: 86.7 dB 2.83V/1m • Fs: 26.2 Hz • Vas: 1.65 ft³ • Qts: 0.59 • Xmax: 19 mm. #295-512 Dayton Audio UM15-22 15" Ultimax DVC Subwoofer • Over 1-1/2" of total cone travel Specifications: • Power handling: 800 watts RMS/1,600 watts max • Impedance: 4 ohms (2 ohms/coil) • Frequency response: 15-1,000 Hz • SPL: 86.5 dB 2.83V/1m • Fs: 19.5 Hz • Vas: 7.92 ft³ • Qts: 0.47 • Xmax: 19 mm. #295-514 Dayton Audio UM18-22 18" Ultimax DVC Subwoofer • Over 2" of total cone travel! • 1,000 watts RMS power handling Specifications: • Power handling: 1,000 watts RMS/2,000 watts max • Impedance: 4 ohms (2 ohms/coil) • Frequency response: 19-500 Hz • SPL: 88.6 dB 2.83V/1m • Fs: 19.5 Hz • Vas: 7.49 ft³ • Qts: 0.53 • Xmax: 22 mm. #295-518 #260-248 Speaker L-Pad Attenuator 15WMono 3/8" Shaft 8 Ohm • Easy level adjustment without changing impedance • Great for speaker design tweaking • Maintains 8 ohm impedance L-pads adjust the relative volume of drivers connected to them by placing added resistance in series and parallel, keeping impedance a constant 8 ohm load. Dayton Audio PS95-8 3-1/2" Point Source Full-Range Driver • Copper pole cap in motor assembly reduces inductance and distortion • Detailed, natural sounding full-range audio performance without distortion • Classy copper-anodized phase plug spreads dispersion and avoids resonance #295-349 See page 3-26 for specifications See page 3-36 for specifications. GRS 8SW-4 8" Poly Cone Subwoofer 4 Ohm #292-480 GRS 10SW-4 10" Poly Cone Subwoofer 4 Ohm #292-482 GRS 12SW-4 12" Poly Cone Subwoofer 4 Ohm #292-484 GRS Poly Cone Subwoofers • Butyl rubber surround ensures high excursion and long-term durability • Polypropylene cone for perfect balance of stiffness, mass, and self-damping • Long-throw design for deep, powerful bass • Large voice coil and bumped back plate enable high power handling
RkJQdWJsaXNoZXIy NDQ2MDk=