Speaker Components Speaker Building 3-31 Drivers 3 Section Part # Model Size Impedance Power Handling (Watts RMS) Frequency Response Sensitivity (2.83 V/1m) Fs Xmax 295-198 DCS165-4 6-1/2" 4 Ohm 100 36 - 1,100 Hz 87.4 35.7 Hz 6 mm 295-200 DCS205-4 8" 4 Ohm 150 30 - 200 Hz 88.6 32.3 Hz 8.8 mm 295-202 DCS255-4 10" 4 Ohm 200 31 - 200 Hz 91 37.7 Hz 8.3 mm 295-204 DCS305-4 12" 4 Ohm 250 23 - 200 Hz 90.5 24.2 Hz 9.3 mm 295-206 DCS385-4 15" 4 Ohm 300 19 - 200 Hz 91.7 17.5 Hz 9.3 mm Dayton Audio Classic Series Subwoofers • Sturdy stamped steel frame • 4-layer VC with polyimide former allows high power handling • Vented pole piece and bumped back plate provide plenty of VC travel with minimal compression • Copper pole piece cap minimizes inductance • Rigid non-pressed treated paper/Kevlar cone with rubber surround • Great for home and automotive applications The Dayton Audio Classic Series subwoofers offer solid value at lower price points. No compromises were made in the design, materials, or construction of these rugged 4 ohm powerhouses. 6-1/2" 8" 10" 12" 15" #295-198 #295-200 #295-202 #295-204 #295-206 Incredibly durable, great sonic quality, unsurpassed value 6-1/2" 8" 10" 15" 18" #295-308 #295-310 #295-315 #295-470 #295-475 Part # Model Size Impedance Power Handling (Watts RMS) Frequency Response Sensitivity (2.83 V/1m) Fs Xmax 295-307 DC130B-4 5-1/4" 4 Ohm 40 50 - 5,000 Hz 92.1 50.5 Hz 2.5 mm 295-302 DC130BS-4 5-1/4" 4 Ohm 30 55 - 4,000 Hz 91.6 51.8 Hz 2.5 mm 295-303 DC130A-8 5-1/4" 8 Ohm 40 50 - 5,000 Hz 88.7 53.2 Hz 2.5 mm 295-304 DC130B-8 5-1/4" 8 Ohm 40 50 - 5,000 Hz 89.1 52.5 Hz 2.5 mm 295-300 DC130AS-8 5-1/4" 4 Ohm 30 55 - 4,000 Hz 88.5 57.2 Hz 2.5 mm 295-301 DC130BS-8 5-1/4" 8 Ohm 30 55 - 4,000 Hz 88.9 50.5 Hz 2.5 mm 295-309 DC160-4 6-1/2" 4 Ohm 60 30 - 4,000 Hz 88.3 39 Hz 3.4 mm 295-305 DC160-8 6-1/2" 8 Ohm 50 30 - 4,000 Hz 86.1 35.7 Hz 3.2 mm 295-310 DC200-8 8" 8 Ohm 60 29 - 3,000 Hz 87 30.3 Hz 4.5 mm 295-315 DC250-8 10" 8 Ohm 70 25 - 2,500 Hz 88.4 24.9 Hz 4.5 mm 295-320 DC300-8 12" 8 Ohm 80 25 - 2,500 Hz 90.3 22.9 Hz 4.3 mm 295-470 DCS380-4 15" 4 Ohm 250 20 - 500 Hz 93.6 21.5 Hz 8.4 mm 295-325 DC380-8 15" 8 Ohm 100 20 - 1,500 Hz 91.8 18.8 Hz 4.35 mm 295-475 DCS450-4 18" 4 Ohm 300 22 - 500 Hz 95.9 26.2 Hz 8.25 mm Dayton Audio Classic Series Woofers One of the main design goals at Dayton Audio is to create loudspeakers that can achieve high levels of performance at reasonable prices. These woofers feature a non-pressed treated paper cone, rubber half-roll surround, ASV voice coil, vented pole piece, coated cloth dust cap, and excellent low frequency response. • Sturdy, easy-to-countersink round steel frame • 4 ohm impedance offers alternative load possibilities • Coated paper cone provides smooth response and reduced cone breakup • Aluminum VC former and vented pole piece for high power handling • Large diameter flat spider and good Xmax for clean bass • Suitable for sealed or vented enclosures
RkJQdWJsaXNoZXIy NDQ2MDk=