Speaker Components Speaker Building 3-28 Drivers 3 Section Get all of your audio information from a single accurate source! • High sensitivity/minimal distortion—an ideal match for lower powered amplifiers Dayton Audio PS Series Point Source Full-Range NeodymiumDrivers PS95-8 3-1/2" Point Source Full-Range Driver Specifications: • Power handling: 10 watts RMS/20 watts max • Impedance: 8 ohms • Frequency response: 110-20,000 Hz • SPL: 85.56 dB • Fs: 119.8 Hz• Vas: 0.03 ft³ • Qts: 0.72 • Xmax: 2.5 mm. #295-349 PS180-8 6-1/2" Point Source Full-Range Neo Driver Specifications: • Power handling: 30 watts RMS/60 watts max • Impedance: 8 ohms • Frequency response: 48-25,000 Hz • Fs: 58.5 Hz • SPL: 94.8 dB 2.83V/1m • Vas: 1 ft³ • Qts: 0.33 • Xmax: 4.6 mm. #295-344 PS220-8 8" Point Source Full-Range Neo Driver Specifications: • Power handling: 40 watts RMS/80 watts max • Impedance: 8 ohms • Frequency response: 40-25,000 Hz • Fs: 46.4 Hz • SPL: 96.5 dB 2.83V/1m • Vas: 3.19 ft³ • Qts: 0.38 • Xmax: 4.8 mm. #295-346 • Klippel-optimized, highperformance design • Powerful neodymium ring motor • Kevlar-reinforced paper cone for excellent detail • Perfect complement for ribbon and planar tweeters Dayton Audio PM Series Wideband Midbass Neo Drivers Wide bandwidth meets high sensitivity Specifications: • Power handling: 30 watts RMS/60 watts max • Impedance: 8 ohms • Frequency response: 55-12,000 Hz • SPL: 94.4 dB 2.83V/1m • Fs: 53.2 Hz• Vas: 1 ft³ • Qts: 0.28 • Xmax: 4.6 mm. PM180-8 6-1/2" PM Series Wideband Midbass Neo Driver #295-343 Specifications: • Power handling: 40 watts RMS/80 watts max • Impedance: 8 ohms • Frequency response: 43-10,000 Hz • Fs: 49.1 Hz • SPL: 95.4 dB 2.83V/1m • Vas: 2.22 ft³ • Qts: 0.38 • Xmax: 4.6 mm. PM220-8 8" Wideband Midbass Neo Driver #295-345 • Full-range with accurate bass and extended high frequency response • Coaxial mounted 3/4" silk dome tweeter Dayton Audio CX120-8 4" Coaxial Driver with 3/4" Silk Dome Tweeter 8 Ohm Woofer specifications: • Power handling: 40 watts RMS/80 watts max • Impedance: 8 ohms • Frequency response: 90-5,500 Hz • SPL: 88.5 dB 2.83V/1m • Fs: 87.5 Hz • Vas: 0.10 ft³ • Qts: 0.48 • Xmax: 3 mm. Tweeter Specifications: • Power handling: 20 watts RMS/40 watts max • Impedance: 8 ohms • Frequency response: 4,500-20,000 Hz • SPL: 89.2 dB 2.83V/1m • Fs: 2,745 Hz. #295-384 #275-131 #275-144 Dayton Audio Reference Series 1-1/8" Tweeters • Matches the performance of even the most expensive audiophile high-frequency transducers • Perfect for line arrays or mini-monitor designs Dayton Audio RST28A-4 1-1/8" Reference Series AluminumDome Tweeters Specifications: • Power handling: 80 watts RMS/120 watts max • Impedance: 4 ohms • Frequency response: 1,500-20,000 Hz • SPL: 92.5 dB 2.83V/1m • Fs: 775 Hz • Qts: 0.93. #275-131 #275-134 Truncated faceplate Dayton Audio RST28F-4 1-1/8" Reference Series Fabric Dome Tweeters Specifications: • Power handling: 80 watts RMS/120 watts max • Impedance: 4 ohms • Frequency response: 1,400-20,000 Hz • SPL: 93.5 dB 2.83V/1m • Fs: 710 Hz • Qts: 0.92. #275-141 #275-144 Truncated faceplate #275-133 RST28A-4RD #275-143 RST28F-4RD Dayton Audio 1-1/8" Reference Series AluminumDome Replacement Diaphragms 4 Ohm • Self-centering for an easy drop in replacement • Restore damaged Dayton Audio RST28A and RST28F tweeters to original new condition • Save money versus buying a complete replacement #275-138 Dayton Audio RS28TF Truncated Faceplate for RS Tweeters • Compact faceplate for Dayton Audio RS Series tweeters • Perfect for line arrays or mini-monitor designs • Fits Usher and others Dayton Audio RS52AN-8 2" Reference Dome Midrange • Large damped rear chamber for low resonance point Specifications (285-020/285-022): • Power handling: 60 watts RMS/120 watts max • Impedance 8 ohms: • Frequency response: 500-14,000/8,500 Hz • SPL: 89.4/90 dB 2.83V/1m • Fs: 341/394.3 Hz • Xmax: 1 mm #285-020 #285-022
RkJQdWJsaXNoZXIy NDQ2MDk=