WES Components Catalogue 2020

Phone: 02-9797-9866 Fax: 02-9716-6015 Audio Speakers & PA 03-52 ZONE AMPLIFIER WITH MIC INPUT AND WIRED REMOTE VOLUME The PRO1328K is a stereo power amplifier with 3.5mm auxiliary and dynamic microphone inputs to stereo 15W output for your speakers. The amplifier can be conveniently tucked-away with only the volume controller visible. The wired remote volume and power I/O controller is connected to the amplifier unit with common CAT5e network cable. This cable is not included so please also order your CAT5 patch cable depending on length required. [See Data & Computer Section 04] • 15 Watts RMS per channel for ample volume • Class D power amplifier for efficiency and low heat • Wired remote volume control with power off • Speaker protection circuit for long service life • Speaker screw terminals for wire sizes up to 12 gauge • Amp module: 115x95x33mm, Controller: 65x45x40mm • 12V 2A Power pack included Code PRO1328K Note: Controller can be connected to the amplifier with an optional CAT5e/6 cable (sold separately) The PRO1328 is a stereo audio power amplifier in a small metal box. Use it to power in-ceiling, in-wall or box speakers with the 15W amplifier output. Connect any 3.5mm line audio source device such as computers, media players, TVs, etc. Then to make an announcement, flick a switch and speak into a microphone (required). This can be used for shop display installations, office and workshop areas, anywhere basic audio amplification and public address announcements are required. All in a simple to connect, compact solution. The unit accepts a 3.5mm line and a 6.35mm dynamic microphone input. It has a volume control and power LED. ZONE AMPLIFIER WITH MICROPHONE INPUT Code PRO1328 • 15W(rms) per channel (@ RL=4 ohm) output power • Stereo Class-D type highly efficient power amplifier • 40dB microphone pre-amplifier gain. 6.35mm socket • Small size and compact: 95mm x 75 mm x 27mm • Suitable for wall-mounting • Speaker screw terminals handle wire sizes from 24 to 12 gauge • 12V 2A power-pack included STEREO 15W AMPLIFIER CLASS-D STEREO 15W AMPLIFIER IN A COMPACT BOX CAT5 CABLE REQUIRED BLUETOOTH® WALL PLATE WITH 15W AMPLIFIER • Ideal wireless low profile room amplifier installation with wall plate volume control • Bluetooth® EDR 3.0 audio receiver • Switch between Bluetooth® or line input (3.5mm front panel or hard wired at rear) • 15Wrms per channel (@ 4 ohm) Class D power amplifier - Screw terminals • Suitable for 4Ω to 8Ω speakers • Compact 75x48x30mm box • Power adaptor included (front or rear) Code PRO1351WP To speakers Optional AUX Optional Power Simple Connection Power input OptionalAUX BT Phone NOT INCLUDED 4-8 Ohm Speakers NOT INCLUDED STEREO 15W AMPLIFIER CLASS-D Stereo audio amplifier with a stereo Bluetooth® receiver built into a wall plate. Use it to power in-ceiling or in-wall speakers with the audio from any Bluetooth® enabled device. Or connect via optional 3.5mm input from other sources. ZONE AMPLIFIER WALL PLATE WITH MICROPHONE INPUT • 15W(rms) per channel Class-D stereo output power • Switch between 3.5mm (line) or 6.35mm microphone inputs • Discrete and compact Decora-style wall-plate design • Speaker screw terminals handle wire sizes from 24 to 12 gauge • Requires speakers and Dynamic Microphone Code PRO1328WP PRO1328WP 12VDC 2.5A Power supply (inc.) Dynamic microphone (not included) In-wall/In-ceiling speakers (not included) Radio/MP3 player (not included) STEREO 15W AMPLIFIER CLASS-D Stereo audio 15W amplifier with a microphone input all built-in to a wall plate. Use it to power in-ceiling or in-wall speakers with the audio output from a line-level sources. Then to make an announcement, flick a switch and speak into a microphone (required). This can be used for shop display installations, office and workshop areas, anywhere basic audio amplification and public address announcements are required. The wall plate amplifier accepts a 3.5mm line and a 6.35mm dynamic microphone input. It has a volume control and power LED. 12Vdc 2A power supply is included and can be front facia connected or rear soldered if required. 115x68x45mm † † Zone Amplifiers Wall Plate Types

RkJQdWJsaXNoZXIy NDQ2MDk=